Tilton OT-215, 8 1/2" (215mm) Sintered Metallic Clutches are available as twin, triple and four plate designs, with a selection of different diaphragm springs and to fit either step type or pot type flywheels. These Clutches are primarily designed Drifting, Off-Road/Rally Raid, Track Day/Pro Touring car applications. Compared to a 7.25” clutch of the same number of discs the OT-215 8.5” Metallic Clutches provide approximately 50% more mass for increased heat capacity to keep overall clutch temperatures down, while providing higher torque capacity and better modulation.
Version | TORQUE CAPACITY | WEIGHT | ||
Nm | lb-ft | KG | Lbs | |
2-disc | 1160 | 860 | 6.2 | 13.6 |
3-disc | 1750 | 1290 | 7.9 | 17.5 |
4-disc | 2330 | 1720 | 9.7 | 21.3 |
The figures listed in the tables should only be used as a guide. Clutch selection needs to take into account the type of event it is being used for and what it is being fitted into. If you require and help making you clutch selection please call or email for guidance
Please Note: Driven plates are not included and should be ordered seperately, by clicking the associated products link below, a range of spline sizes are available from stock, if you are not certain of your requirement please contact us for assistance.