01327 857991
The Cartek power distrubtion panel is a fully intergrated, electronic solution to power distribution in race and rally cars. The panel is designed to replace 8 fuses, relays and switches as well as a variety of control systems. These units aim to simplify the wiring while maximising reliability.
● 8 User Configurable Channels (no Laptop required)
● Selectable current settings of 5, 10 or 15 Amps. Combine two channels together for 20, 25 or 30 Amps
● Selectable Functions such as:
-Momentary action (Starter Motor, Washer Pump etc)
-Latching (with memory)
-Latching (without memory)
-Latching with Time Delay (Heated Screen)
-Flashing (Indicators etc)
-Toggling (Headlights High Beam/Low Beam)
-0v Momentary action (use as ordinary switch for ECU Map etc)
● Over Current and Short Circuit Protection - no Fuses or Relays needed.
● 2 Battery Isolator XR Inputs - allowing the Battery Isolator XR to shut down the Power Distribution Panel.
● Dedicated Wiper Module included as standard.
● 8 Momentary Switch Inputs - allowing any channel to be operated by an additional switch or the Cartek Wireless
Control System.
● 8 ECU Inputs - allows the ECU to turn on channels such as Fuel Pumps.
● 4 Dedicated function inputs - Flash Input for Lights, Wash Input for Wipers, Wiper Park position etc.
Cartek Power Distribution Panel
8 Channel Retro Style Panel
(0)
