01327 857991
Cartek power distrubtion panel plugs can be supplied complete with pig tails or supplied in part form so you can build into your own wiring loom. These units aim to simplify the wiring while maximising reliability.
● 16 User Configurable Channels (no Laptop required)
● Selectable current settings of 0, 5, 10 or 15 Amps. Combine two channels together for 20, 25 or 30 Amps
● Selectable Functions such as:
-Momentary action (Starter Motor, Washer Pump etc)
-Latching (with memory)
-Latching (without memory)
-Latching with Time Delay (Heated Screen)
-Flashing (Indicators etc)
-Toggling (Headlights High Beam/Low Beam)
-0v Momentary action (use as ordinary switch for ECU Map etc)
● Over Current and Short Circuit Protection - no Fuses or Relays needed.
● 2 Battery Isolator XR Inputs - allowing the Battery Isolator XR to shut down the Power Distribution Panel.
● Dedicated Wiper Module included as standard.
● 16 Momentary Switch Inputs - allowing any channel to be operated by an additional switch or the Cartek Wireless
Control System.
● 16 ECU Inputs - allows the ECU to turn on channels such as Fuel Pumps.
● 4 Dedicated function inputs - Flash Input for Lights, Wash Input for Wipers, Wiper Park position etc.
CK-PDP-CC CK-PDP-LF CK-PDP-CA CK-PDP-LD
Cartek Power Distribution Panel Plugs
(0)
