The DL1 Club Data logger is a unit that stores data for analysis (viewing live data can be made possible by adding a DASH display). A step up from the DL1 Sport, this unit features a built in GPS system that allows for precise lap times, sector times and speed data, as well as supporting the features of the DL1 Sport such as accelerometers, grip usage, cornering etc.

The unit comes with comprehensive software for data analysis, with data based on track/lap/sector times referencing logical GPS positions, overcoming the predictive nature of track beacons. The recording process starts with a simple push of a button, and the unit can record up to 32gb of data on an SD card (not included)

With a host of different add-ons, components and updates supported, the DL1 Club data logger can perform and exceed expectations when it comes to your vehicles data system.

• Built in GPS - The new GPS unit is based on our own high accuracy GPS3 technology and calculates position and speed 5 times every second. The measurements from the GPS and accelerometers are combined to calculate very high accuracy positions and speeds at 100 times a second. Optional storage of raw GPS data for post processing at 20Hz is also possible.
• Built in 3-axis accelerometer with 2g full scale (optional 6g full scale).
• Built in yaw gyro for slip angle measurement (optional)
• Logging to SD cards
• Works with SD and SDHC, for up to 32GB storage.
• Up to 12 analogue inputs and up to 4 output drivers.
• Low side driver outputs are available for controlling pumps, fans, lights.
• The DL1 features 4 totally independent wheel/shaft speed inputs. These can be used to measure the speed of all four wheels, or slip ratios across a torque converter for example.
• Two RS232 ports - Either port can be used to receive data for logging, one port is always used for outputting data for storage to a VIDEO4 or to a DASH display.
• CAN port enable receiving and transmitting of messages at configurable rates up to 1Mbit/s
• Remote start/stop and add marker inputs
• Two independent 5v outputs can be used to drive up to 500mA each for sensor outputs.
• A single button to start or stop logging, it's as simple as that! If the button is inaccessible from the drivers seat then a remote button and status indicator can be added if required.
• The power supply to the DL1 CLUB data logger can be taken directly from the vehicles 12v supply, or it can be powered from it's own battery if required. The power supply is smoothed and regulated within the DL1 CLUB ensuring its performance is highly robust and stable.
• USB connection for direct connection to a PC for configuration
• The DL1 Club has the ability to interface and decode data from ECUs directly. This makes for a more streamline installation and setup.
• The DL1 CLUB has the latest 150MHz processor for maximum expandability and functionality