01327 857991
Coils have always had to compromise voltage output against current output. More voltage increases the initial ionization of the spark plug gap but lowers the amount of current, or heat, that follows across the plug gap. When a coil is designed to produce more current, the voltage output generally suffers which taxes the ease of ionizing the gap. The MSD HVC Coils are designed to produce maximum voltage and energy!
Features:
- Designed for high rpm, long duration applications
- Works with electronic ignitions and MSD Ignition Controls (ballast resistor required for points systems)
- 100:1 turns ratio and lower primary resistance produce high voltage output
- Windings are encased in blue epoxy and secured with extruded brackets
- Spark plug style terminal and threaded brass primary studs
- Supplied with rubber shock mounts
Specifications
- Inductance 7 mH
- Maximum Voltage 42,000 Volts
- Peak Current 300 mA
- Primary Resistance .02 OHMs
- Secondary Resistance 1.38K OHMs
- Spark duration 200 uS
Note: Blaster Coils can be used with a production ignition systems or Blaster Ignition, MSD 5, 6 or 7 series Ignition Controls. If used on a standard ignition with either points or electronic system with points type dwell then a ballast resistor should be used, MSD ignition systems and most variable dwell type electronic ignition systems will not require ballast. If you would like us to confirm suitability for your intended application then please contact us with the details.
MSD Blaster HVC Ignition Coil
(0)
