01327 857991
For upgrading a standard ignition coil or to compliment the performance of MSD Blaster 5, 6 or 7 series ignitions then the Blaster 2 Coil is the right choice. The Blaster Coil is designed for improved spark output utilising special 100:1 windings to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is moulded of durable alkyd material due to its high dielectric characteristics while widely spaced brass primary terminals prevent the possibility of spark. Blaster Coils can be used with a production ignition systems or Blaster Ignition, MSD 5, 6 or 7 series Ignition Controls. If used on a standard ignition with either points or electronic system with points type dwell then a ballast resistor should be used, MSD ignition systems and most variable dwell type electronic ignition systems will not require ballast. If you would like us to confirm suitability for your intended application then please contact us with the details.
• Turns ratio: 100:1
• Primary resistance: .7 OHMs
• Secondary resistance: 4.5K OHMs
• Inductance: 8 mH
• Maximum voltage: 45,000 Volts
• Peak current: 140 mA
• Spark duration: 350 uS
Please Note:
The version supplied complete with ballast resistor also includes two 90 degree ignition cable terminals.
No mounting bracket is supplied with these coils and should be ordered separately if required.
8202 82023 8222
MSD Blaster 2 Ignition Coils
(0)
