01327 857991
The Blaster SS coil is a compact, high-performance coil. The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. Ideal for use with an MSD 6 Series ignition where the Blaster SS produces 300 milliamps of current and a maximum output of 40,000 volts.
Features:
• Improved output coil for electronic ignitions and MSD Ignitions
• Efficient winding design and assembly creates a compact housing
• Primary and secondary windings are encased in Ciba polyurethane
• 70:1 turns ratio and lower primary resistance produce high voltage output
• Tough, rigid housing with a tall tower and brass primary terminals
Specifications
• Inductance 6.9 mH
• Maximum Voltage 40,000 Volts
• Peak Current 300 mA
• Primary Resistance .355 OHMs
• Secondary Resistance 4.4K OHMs
• Spark duration 220 uS
Note:
If installing the Blaster SS Coil to a points distributor or a non-current limiting ignition system without an MSD Ignition, a 0.8 ohm ballast resistor is required. The resistor should wire in series along with any factory resistors on the positive coil wire.
8207 82073
Blaster SS High Performance Ignition Coils
(0)
