01327 857991
Tilton Clutch Flywheel Assemblies come complete with Clutch and driven plates, button flywheel and bolt kit. These Assemblies come with either 1 1/16 x 10 spline, 1 1/8 x 10 spline or 1 5/32 x 26 spline. These Clutches are available as either twin or triple plate designs and 5 1/2'' or 7 1/4'' diameter. They benefit from Tilton's longer finger diaphragm design which allows them to be used with either a conventional 52mm contact bearing or for better performance a 44mm contact release bearing. This reduces the pedal effort required to release and improves the modulation to facilitate better and more consistant starts. The one pieces aluminium clutch basket is of an open "lug drive" design which allows the clutch to run cooler and cleaner than A-ring type clutches whilst the drive is transmitted to the cover via forged steel thrust buttons fitted in the legs, a more reliable and durable method than the thin stainless wear clips favoured by other manufacturers.
Please Note: (E)= Early crank with two-piece rear main seal; (L)= Late crank with one-piece rear main seal
57-102 57-141 57-101 57-140 56-102 56-141 56-101 56-140 56-140L 56-101L 56-102L 56-141L 57-141L 57-102L 57-101L 57-140L 57-282-06 57-281-06 57-281 57-282 57-282-05 57-281-05 56-282-05 56-141LS 56-102LS 56-281-05 56-282 56-281 56-103
Tilton Clutch-Flywheel-Assemblies
(0)
