The Aim Solo 2 lap timer is incredibly easy to use & can be fitted in seconds thanks to the integrated GPS receiver & rechargeable Lithium battery. Upon power up the Solo 2 will check its location against the integrated database of over 2000 circuits worldwide meaning you can be up and running in minutes. Should you be at a venue that is not covered in the database the Aim Solo 2 will enter the autolearning mode to map the new track as you drive.
A row of 5 LEDs on either side of the display screen illuminate red or green in increments (0.05 second, 0.1 second or 0.2 second) to allow you to see if your current lap is faster or slower than your current best lap.
All information can be quickly recalled on to the unit’s screen or transferred to a computer via WiFi allowing in depth analysis and comparison of laps.
The Aim Solo 2 display can display 1 of 5 information screens (2 of which can be configured by the user) and has a choice of 7 backlight colours.

The Aim Solo 2 can also be used as a performance meter with options for measuring 0-60 mph, 60-0 mph, 1/8 mile, ¼ mile, 0-100 kmh, 0-160 kmh, 100 metres, 150 metres, 400 metres or 1000 metres.

The Aim Solo 2 is also available with an option to connect an AIM Smarty Cam and/or a link to the vehicles ECU allowing engine parameters to be included. Please see the Aim Solo 2 DL.

Solo 2 Lap Timer
Power cable with car lighter socket,
Power cable with AC adapter,
Mounting bracket with screws,
User manual,
Software installation CD,
Aim sticker.

Display : Graphical
Display resolution : 238×99 pixels
Display pages : Up to 5 freely configurable
Backlight : 7 configurable RGB colors
Shift lights/alarm LEDs : 10 configurable RGB LEDs
Integrated track database : Yes
Inertial platform : Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer
Wi-Fi connection : Yes
GPS : 10 Hz
External power : 12 V
Memory : 4 GB
Battery type : Rechargeable Lithium
Pushbuttons : Metallic
Dimensions : 98.0×73.7×30.2 mm
Weight : 240 g, battery included
Waterproof : IP67

Display: Graphical
Display resolution: 238×99 pixels
Display pages: Up to 5 freely configurable
Backlight: 7 configurable RGB colors
Shift lights/alarm LEDs: 10 configurable RGB LEDs
Integrated track database: Yes
Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer
Wi-Fi connection: Yes
GPS: 10 Hz
External power: 12 V
Memory: 4 GB
Battery type: Rechargeable Lithium
Pushbuttons: Metallic
Dimensions: 98.0×73.7×30.2 mm
Weight: 240 g, battery included
Waterproof: IP67