01327 857991
Ideal for protection against radiant heat this reflective heat shield comprises a weavelocked continuous filament 800g/m² glass cloth with an aluminium foil laminated to the outer face and a high temperature, high tack, adhesive applied to the underside. The aluminium foil and weavelock prevent fray after cutting. The glass fabric is rated to 550˚C and the film adhesive is rated to 150˚C, this product is designed to reflect radiant heat and not designed to be in direct contact with the heat source, so whilst the aluminium foil is rated at up to 450˚C it can be limited by the underlying adhesive used to laminate the foil to the glass cloth.
Stocked on a roll which is 1m wide, should you order 1m width and 1m length it a quantity greater than 1 we will supply as a continuous length unless you request or we advise otherwise.
Please Note: Due to the lamination process on some occasions the width of the fabric may be slightly reduced but the 500mm will have a width of no less than 475mm and the 1m no less than 950mm.
Please Note: Tolerance on cut lengths is 2%
HSA520.25 HSA520 HSA520.50
Adhesive Backed Reflective Heat Shield
(0)
