01327 857991
Threaded guide tubes fr use with the Tilton 600 and 6000 series hydraulic release bearings. These units allow the simple installation of a concentric hydraulic release mechanism in transmissions which have a bearing guide tube for the O.E installation. Three versions are available, two versions pre-bored to suit popular guide tubes and a third pilot bvored for use in custom installations.
Custom Applications: 600 series hydraulic release mechanisms are ideally suited to custom applications as they can generally be readily adapted to mount on any transmission which incorporates a guide tube for the O.E. bearing carrier.
As a general rule a minimum of 5mm clearance would be required between the bose of the O.E. guide tube and the contact face of the clutch diaphragm spring. If you require assistance with your installation please contact us.
| Part Number | Internal Diameter | Applications |
| 61-627 | 1.436" (36.47mm) | Ford/Tremec TKO/500/600/T5 & Top Loader |
| 61-628 | 1.376" (34.95mm) | GM/Tremec T5/TKO/500/600 & Saginaw |
| 61-629 | 1.00" (25.4mm)* | Custom |
*MAY BE MACHINED TO MATCH O.D. OF GEARBOX GUIDE TUBE. DO NOT EXCEED 1.450" INTERNAL DIAMETER
61-627 61-628 61-629
600 & 6000 Series Threaded HRB Mounting Sleeve
(0)
